| At GoMobileNow.com, we have
made it easy to configure your console. Simply choose your vehicle from
above and it will take you to a one page configuration. To build your
console you need a few key components. By choosing the vehicle make,
model and year it will start you with the proper leg kit. The leg kit
attaches to the seat bolts in the specific vehicle. From that point you
need to choose the length of the "Mounting Plate". This plate determines
how long of a console box you can use. Keep in mind if you wish to have
an Arm Rest, Printer or other accessories you may need the longer plate.
Next you will need to choose the actual
Console Box. This box is where all of your radios, switches and any
accessories you may need will be housed. To house the radios and switch
controls you will need Custom Pre-Cut Face Plates. RAM has determined
the most common plates needed for most applications.
On our one page configuration, you can
choose as many face plates as you may need. Once done choosing the face
plates, simply click the ADD TO CART button and your console will be
completed and ready to be built and shipped. |
|
Choose your leg kit. Leg kits are vehicle specific and do not require
any drilling. These bolt directly to the seat bolts. (If your vehicle is
not listed, you can choose our universal leg kit. This kit requires
drilling.) |
Choose your base mounting plate. Mounting plates come in two lengths.
23" & 29". When ordering please take into consideration room and if you
will want an arm rest, printer mount ect. |
Choose your console box. Console boxes come in a multitude of sizes and
shapes. The top picture below is vehicle specific angled design. Comes
with cooling fans and an angled top for ease and comfort. The lower box
is a flat design and comes in 4 lengths. |
Choose your face plates and filler plates. Each console box will accept
many configurations of face plates. with over 100 different custom fit
face plates and many filler plates you are sure to get a solid, complete
looking console. |
