RAM-VB-175-SW1 / RAM Vehicle Laptop Desk Pedestal Assembly for DODGE GRAND CARAVAN

DODGE GRAND CARAVAN (2008-NEWER)

This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Notes:
Some vehicle bases may limit seat travel

	RAM-234-3  (Click to view item in new window) Tough-Tray™ Dimensions: Tray Depth: 10.0" Tray Thickness: 2.125" Tray Width (Expansion): 10" to 16" Side Clamp Arm Height: 0.5" (min) to 1.75" (max)  To verify proper fit, measure your laptop side to side on the bottom. If between 10" and 16", this tray will hold your laptop properly.
	RAM-VB-110-1U   (Click to view item in new window) The RAM-VB-110-1U consists of a double swing arm with swivel socket arm and 2.5" diameter round base with the universal AMPS hole pattern. This mount allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM vehicle mount. Taking the highly successful RAM vehicle mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place.  Double Swing Arm Length: 12"
	RAM-VP-TTM8U (Click to view item in new window) The RAM Upper Tele-Pole 8" Upper Male Inner Pole has a swing arm connection point that will attach to the RAM-VB-110-1, Double Swing Arm System with 1.5" Socket. The male post is 8" long and has a 1.328" diameter
	RAM-VP-TBF9U (Click to view item in new window) The RAM Tele-Pole 9" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill™ and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles™. The female post is 9" tall and has a 1.375" diameter.
	RAM-VB-175  (Click to view item in new window)

	If you choose this option, the RAM Tough Tray, will not come with your laptop mount. This would be used if you have a tray, or another top you choose to use. The mount would come with the Base Plate, Lower Tube (if applicable), Upper Pole, Swing Arm with a 1 1/2" Ball.
	If you choose this option, the RAM Tough Tray and the Ball Adapter will be replaced with the RAM-234-PAN1PB,  RAM Tough-Dock™ Powered Docking Station with Port Replication AND ROUND ADAPTER BASE for Panasonic Toughbook® CF-28, CF-29, CF-30 and CF-31 Rugged Laptops.
	If you choose this option, the RAM Tough Tray will be replaced with the RAM-234-6, RAM Tough Tray II™ Universal Netbook, iPad & Tablet Cradle Holder. This tray attaches to the 1.5" Ball adapter that is on the swing arm.
	If you choose this option, the RAM Tough Tray and the Ball Adapter will be replaced with the RAM-2461, RAM 75mm X 75mm VESA 3.625" Plate with 1.5" Diameter Ball.
	If you choose this option, the RAM Tough Tray and the Ball Adapter will be replaced with the RAM-246, RAM Mount 75mm and 100mm hole pattern VESA 4.75 Inch Plate with Off Center 1.5 Inch Diameter Ball