Return Policy/Terms
RAM Vehicle Laptop Pedestal Assembly for the following vehicles:
The RAM Tough Tray™ is spring loaded to accommodate 10 to 16 inch wide laptops. Tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives.
A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Tough-Tray™ Dimensions: Tray Depth: 10.0" Tray Thickness: 2.125" Tray Width (Expansion): 10" to 16" Side Clamp Arm Height: 0.5" (min) to 1.75" (max)
To verify proper fit, measure your laptop side to side on the bottom. If between 10" and 16", this tray will hold your laptop properly.
The RAM-VB-110-1U consists of a double swing arm with swivel socket arm and 2.5" diameter round base with the universal AMPS hole pattern. This mount allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM vehicle mount. Taking the highly successful RAM vehicle mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Double Swing Arm Length: 12"
The RAM upper Tele-Pole™, 4" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket.
The male post is 4" long and has a diameter of 1.328".
The female post is 5" tall and has a 1.375" diameter.
